Availability: Immediate
Art Phantom I Active Direct Box with Phantom Power (phantom 1)
£23.99
£19.99
Direct boxes are the sound engineers’ Swiss Army knife!
Here are some examples:
Problem: You need to connect an amplifier’s speaker output to the mic input on a mixer. Solution: Connect a Phantom I between the speaker output and a mic input with phantom power on the mixer, then set the attenuation switch to –40dB.
Problem: Your PA is humming because there is a ground loop between a signal source and the mixer.Solution: Connect a Phantom I between the signal source and a mic input with phantom power and set the ground switch to Lift.
Problem: You need to connect an unbalanced line-level source (ie: a synthesizer, another mixer, an effects device, etc.) to a mic input on the mixer. Solution: Connect a Phantom I between the source and a mic input with phantom power and set the Attenuator switch to –20dB.
Phantom I - Active Direct Box w/ Phantom Power Specifications
- Signal To Noise Ratio 100dB
- Input Level –10 to +40dB
- Output Level –10 to +2dB
- Input Connectors Dual 1/4 in, unbal. inputs are parallel
- Output Connectors XLR Balanced
- Frequency Response 1Hz – 50kHz
- Ground Lift Switch
- Input Attenuation Switchable signal padding: –20dB
- Phantom Power LED Indication when present
- Power 9 to 48V DC of phantom power
- Dimensions 3.75x2.875x1.5 inches (95mm x 74mm x 40mm)
- Weight 0.7lbs. (317g)
