Availability: Immediate
Line 6 Toneport UX1 USB Audio Interface (toneportux1)
£93.49
£64.99
LINE 6 TONEPORT UX1 RECORDING AND MODELLING USB INTERFACE TonePort combines trusted Line 6 modelling with powerful, easy recording via a UPS powered interface. The Line 6 TonePort UX1 features the pro amplifier, cabinet, and effects models from the PODxt and Bass PODxt, high-quality vocal preamp models; and a simple, latency-free USB recording interface in one amazing box. Inputs and outputs are 1 XLR mic input, 1 Hi-Z guitar or bass input, 1/4" stereo Line Inputs, and 1/4" stereo Monitor In, and Right and Left 1/4" Analog Outs.
The included GearBox tone software provides a hardware-like, easy to navigate interface for dialing up the perfect tone for your guitar, bass, and vocals. Instantly access meticulously crafted models of 16 classic and modern guitar amps, 5 stellar bass amps, 24 stompbox effects, as well as models of classic vocal preamps.
A special Line 6 edition of Ableton Live Lite 4 integrates seamlessly with TonePort, enabling you to track with ease, and the powerful drivers included mean low-latency recording with almost any recording software.
LINE 6 TONEPORT UX1 GEARBOX™ AMP MODELS Fron the Line 6 PODxt: Line 6® Treadplate, Line 6® Chemical X, Line 6® Insane, Line 6® Piezacoustic 2, Line 6® Spinal Puppet 1953 Small Tweed based on "wide panel" Fender® Deluxe Reverb®, 1958 Tweed B-Man based on Fender® Bassman® 1964 Blackface 'Lux based on Fender® Deluxe Reverb®, 1967 Class A-30 Top Boost based on Vox® AC-30 1968 Plexi Lead based on Marshall® Super Lead, 1968 Plexi Jump Lead based on Marshall® Super Lead with "jumped" channels 1987 Jazz Clean based on Roland® JC-120, 1990 Brit J-800 based on Marshall® JCM-800 1993 Solo 100 Head based on Soldano SLO-100, 2001 Treadplate based on Mesa/Boogie® Dual Rectifier® Tube Instrument Preamp.
From Bass PODXT: Rock Classic based on Ampeg® SVT, Flip Top based on Ampeg® B-15A, Adam and Eve based on Eden Traveler WT-300, Silverface Bass based on Fender® Dual Showman®, Eighties based on Gallien Kruger 800RB.
LINE 6 TONEPORT UX1 GEARBOX™ STOMPBOX AND STUDIO EFFECTS Facial Fuzz (based on Fuzz Face), Fuzz Pi (based on Big Muff Pi®), Screamer (based on Tube Screamer®), Classic Distortion (based on ProCo Rat), Vetta™ Comp Line 6® Sine Chorus, Line 6® Flanger Phaser (based on MXR® Phase 90), U-Vibe (based on Uni-Vibe), Opto Tremolo (based on 1965 Fender® Deluxe Reverb®), Rotary Drum & Horn (based on Leslie® 145), Analog Delay Modulation (based on Deluxe Memory Man), Tube Echo (based on EP-1 Tube Echoplex) Line 6® Digital Delay, Standard Spring Reverb Brite Room Reverb, Medium Hall Reverb, Cavernous Reverb, Slap Plate Reverb Wah (based on Vox® Wah), Volume (Pre- or Post-Amp Routing options), Compressor (based on LA-2A® Compressor), Female De-Esser, Male De-Esser, Noise Gate, De-Esser.
LINE 6 TONEPORT UX1 GEARBOX™ GEARBOX™ PREAMP MODELS
American Classic. Inspired by an API lunch box preamp in a classic studio setup: API - 512c Mic Pre, API - 550b EQ, Studer® - 2-inch tape (Including Emphasis/De-emphasis & tape Soft Clip.
Vintage UK. Inspired by a Neve 1073.
Modern. Inspired by an Avalon Vt737.
Console. Solid State Console Mic Pre Design.
Vintage. Inspired by a Classic Vintage Tube Preamp setup consisting of: Requisite Y7 Mic Pre, API - 550b EQ, Studer® - 2-inch tape (Including Emphasis/De-emphasis & tape Soft Clip).
Lo-Fi. A small speaker sound that’s slightly distorted, great for adding an overdriven vocal to a track.
LINE 6 TONEPORT UX1 RECORDING AND MODELLING USB INTERFACE FEATURES
- Pro amp, cab, stompbox, and studio effects models from the Line 6 PODxt and Bass PODxt.
- High-quality vocal preamp models
- GearBox software provides hardware-like interface.
- 1 XLR mic input.
- 1 1/4" TS Hi-Z guitar/bass input.
- Stereo line inputs .
- Stereo line outputs (2 - 1/4")
- Stereo 1/4" monitor input.
- Headphone out.
- Over 100dB signal-to-noise & dynamic range.
- Unique low-latency monitoring regardless of recording software's buffer size.
- 44.1/48KHz sample rates.
- 16-/24-bit bit depth recording.
- 96KHz mode with built-in sample rate conversion for simultaneous input and output.
- USB-powered.
- Rock-solid drivers: ASIO, WDM, Mac OS X.
LINE 6 TONEPORT UX1 MINIMUM SYSTEM REQUIREMENTS
- Windows Pentium® IV 1.2GHz or better (2.5Ghz or more recommended).
- Windows XP® (with SP2 only) or Windows® 2000 (with SP4 or later)
- 512MB RAM minimum (1GB or more recommended).
- 1GB free HD space minimum (10GB or more recommended for recording).
- Drive speed 5400rpm minimum (7200rpm or faster recommended).
- CD-ROM drive.
- Internet connection for online features.
- Mac G4 800MHz or better (G4 1.5 or better recommended).
- OS X 10.4 or better.
- 512MB RAM minimum (1GB or more recommended).
- 1GB free HD space minimum (10GB or more recommended for recording)
- Drive speed 5400rpm minimum (7200rpm or faster recommended).
- CD-ROM drive.
- Internet connection for online features.
One free USB 1.1 or 2.0 compatible port on the host computer, or self-powered USB hub. TonePort requires power from USB, so bus-powered USB hubs are not supported.
